New Community Website

Ordinarily, you'd be at the right spot, but we've recently launched a brand new community website... For the community, by the community.

Yay... Take Me to the Community!

The Community Blog is a personal opinion of community members and by no means the official standpoint of DNN Corp or DNN Platform. This is a place to express personal thoughts about DNNPlatform, the community and its ecosystem. Do you have useful information that you would like to share with the DNN Community in a featured article or blog? If so, please contact .

The use of the Community Blog is covered by our Community Blog Guidelines - please read before commenting or posting.

Improvements to Compression Module

Today we are going to look at improvements to the Compression Module for DotNetNuke 4.5. These were confirmed using DNN 4.5 RC2.

Let's start with a little history. Early versions of DotNetNuke had no provisions for page compression. There were options, such as the Blowery HttpCompressionModule, but they generally required the user to modify the default installation of DNN. In addition to modifying the application, you also had to manually exclude paths and mime types. If you wanted to upgrade your site, you had to modify the web.config to remove the compression. If you did not, hold on it is gonna be a long night.

Starting with version 4.4 of DotNetNuke, compression was implemented in the core. This was a nice feature for many people, but for just as many it was a source of problems. Most problems were found to revolve around the fact that the user had to exclude mime types and paths via the compression.config. This could often lead to a trial and error process that would quickly sour the user experience as well as increase the number of problems an implementor had to deal with. After a thorough review of the problem, it was decided that Default.aspx was the only page that needed to be compressed. Enter DNN 4.5.

Starting in version 4.5, the compression module will only compress the default.aspx page. The end user will no longer have to set-up excluded paths or mime types. You can still exclude paths via the Host Settings -> Compression Settings -> Excluded Paths field. The proper format for this would be TabId=xx, where xx equals the actual number of the TabId. This feature is there in case there is a page (tab) that is giving you problems do to compression. So if I create a page named AlecTest, TabId 357, that has a module on it that is giving me trouble do to the compression, I can then exclude it by adding tabid=357 to the Exclude Paths field.

Overall, I think the improvements are going to eliminate a large number of problems that users were seeing with HTTP compression in DotNetNuke. Under a default installation, the default home page was returning 44k in text. After turning on compression, that shrunk down to 17k. This is a significant savings of bandwidth over many requests.


Comment Form

Only registered users may post comments.


Aderson Oliveira (22)
Alec Whittington (11)
Alessandra Davies (3)
Alex Shirley (10)
Andrew Hoefling (3)
Andrew Nurse (30)
Andy Tryba (1)
Anthony Glenwright (5)
Antonio Chagoury (28)
Ash Prasad (37)
Ben Schmidt (1)
Benjamin Hermann (25)
Benoit Sarton (9)
Beth Firebaugh (12)
Bill Walker (36)
Bob Kruger (5)
Bogdan Litescu (1)
Brian Dukes (2)
Brice Snow (1)
Bruce Chapman (20)
Bryan Andrews (1)
cathal connolly (55)
Charles Nurse (163)
Chris Hammond (213)
Chris Paterra (55)
Clint Patterson (108)
Cuong Dang (21)
Daniel Bartholomew (2)
Daniel Mettler (181)
Daniel Valadas (48)
Dave Buckner (2)
David Poindexter (12)
David Rodriguez (3)
Dennis Shiao (1)
Doug Howell (11)
Erik van Ballegoij (30)
Ernst Peter Tamminga (80)
Francisco Perez Andres (17)
Geoff Barlow (12)
George Alatrash (12)
Gifford Watkins (3)
Gilles Le Pigocher (3)
Ian Robinson (7)
Israel Martinez (17)
Jan Blomquist (2)
Jan Jonas (3)
Jaspreet Bhatia (1)
Jenni Merrifield (6)
Joe Brinkman (274)
John Mitchell (1)
Jon Henning (14)
Jonathan Sheely (4)
Jordan Coopersmith (1)
Joseph Craig (2)
Kan Ma (1)
Keivan Beigi (3)
Kelly Ford (4)
Ken Grierson (10)
Kevin Schreiner (6)
Leigh Pointer (31)
Lorraine Young (60)
Malik Khan (1)
Matt Rutledge (2)
Matthias Schlomann (16)
Mauricio Márquez (5)
Michael Doxsey (7)
Michael Tobisch (3)
Michael Washington (202)
Miguel Gatmaytan (3)
Mike Horton (19)
Mitchel Sellers (40)
Nathan Rover (3)
Navin V Nagiah (14)
Néstor Sánchez (31)
Nik Kalyani (14)
Oliver Hine (1)
Patricio F. Salinas (1)
Patrick Ryan (1)
Peter Donker (54)
Philip Beadle (135)
Philipp Becker (4)
Richard Dumas (22)
Robert J Collins (5)
Roger Selwyn (8)
Ruben Lopez (1)
Ryan Martinez (1)
Sacha Trauwaen (1)
Salar Golestanian (4)
Sanjay Mehrotra (9)
Scott McCulloch (1)
Scott Schlesier (11)
Scott Wilkinson (3)
Scott Willhite (97)
Sebastian Leupold (80)
Shaun Walker (237)
Shawn Mehaffie (17)
Stefan Cullmann (12)
Stefan Kamphuis (12)
Steve Fabian (31)
Steven Fisher (1)
Tony Henrich (3)
Torsten Weggen (3)
Tycho de Waard (4)
Vicenç Masanas (27)
Vincent Nguyen (3)
Vitaly Kozadayev (6)
Will Morgenweck (40)
Will Strohl (180)
William Severance (5)
What is Liquid Content?
Find Out
What is Liquid Content?
Find Out
What is Liquid Content?
Find Out